Peka 10 - Replacement Filter Cartridge
Replaceable filter
CHF130.–
including VAT &
Two-stage pre-filter, pore size 25 μm to 1 μm
Peka 10 - Replacement Filter Cartridge
Replaceable filter
CHF130.–
including VAT &
Lasts approx. 12 months
Two-stage pre-filter, pore size 25 μm to 1 μm
Suitable replacement filters:
Two-stage pre-filter – effective protection against particles, rust, and suspended solids
The high-quality MAUNAWAI® primary filter ensures thorough pre-filtration of your tap water and boasts three times the dirt-holding capacity compared to conventional filter cartridges of similar size.
Thanks to its two-stage filtration technology, it reliably removes coarse and fine particles—for clearer, cleaner water throughout your home.
Effective two-stage filtration:
Your benefits at a glance:
The integrated two-stage sediment filter made of polypropylene foam reliably removes:
Dimensions:
Total height: 25.5 mmDiameter: 11.5 mm Weight: 0.6 kg
Water flow rate depends on the incoming water pressure.
The Peka basic filter reduces this by approximately 0.5 bar and delivers a flow rate of approx. 25–30 liters per minute at a minimum water pressure of 4 bar.
The two-stage MAUNAWAI® basic filter is the ideal solution for pre-filtering tap water.
It protects your water system from particles and sediment, ensuring consistently clear water quality and extending the service life of all subsequent filter stages.
If you would like further information, please contact our service office; we would be happy to assist you.
Tel.: +49-3327-570880
The high-quality MAUNAWAI® primary filter ensures thorough pre-filtration of your tap water and boasts three times the dirt-holding capacity compared to conventional filter cartridges of similar size.
Thanks to its two-stage filtration technology, it reliably removes coarse and fine particles—for clearer, cleaner water throughout your home.
Effective two-stage filtration:
- Outer layer (25 μm): reliably traps larger particles such as sand, silt, rust, and pollen.
- Inner layer (1 μm): removes the finest suspended particles and ensures particularly thorough purification.
Your benefits at a glance:
The integrated two-stage sediment filter made of polypropylene foam reliably removes:
- as well as particles larger than 1 μm.
- Three times the dirt-holding capacity of standard filters
- Reliably removes sand, rust, sludge, pollen, and suspended particles
- Two-stage filter system for maximum efficiency
- Ideal as a pre-filter for water treatment systems or domestic water systems
- Extends the service life of downstream filters and systems
Dimensions:
Total height: 25.5 mmDiameter: 11.5 mm Weight: 0.6 kg
Water flow rate depends on the incoming water pressure.
The Peka basic filter reduces this by approximately 0.5 bar and delivers a flow rate of approx. 25–30 liters per minute at a minimum water pressure of 4 bar.
The two-stage MAUNAWAI® basic filter is the ideal solution for pre-filtering tap water.
It protects your water system from particles and sediment, ensuring consistently clear water quality and extending the service life of all subsequent filter stages.
If you would like further information, please contact our service office; we would be happy to assist you.
Tel.: +49-3327-570880
Technical specifications
- Change interval
- 12 months
- Filter performance
- 120,000 liters
- Weight (empty)
- 0.5 kg
- Included in the scope of delivery
-
- 1x Peka 10 - Replacement Filter Cartridge
Product Safety & Compliance
Product Safety Data Sheet (GPSR)
Manufacturer's marking
Brand: MAUNAWAI
MAUNAWAI GmbH, Adolf-Damaschke-Str. 69-70, 14542 Werder / Germany