Peka 20 Basic Filter Module

PiConnect "Peka 20" home water system with a MAUNAWAI® pre-filter.

The MAUNAWAI® pre-filter has three times the dirt-holding capacity compared to conventional filter cartridges of similar size.

For well water, we recommend a water analysis so that we can tailor the system optimally to your individual needs.
For maximum filtration performance, 2–4 filter modules can be flexibly combined—we would be happy to advise you individually on this. Water FlowWater flow depends on your water pressure.
The Peka system reduces the incoming water pressure by approx. 0.5 bar.Water flow rate: approx. 50–60 l/min at a minimum water pressure of 4 bar Two-stage sediment filter made of polypropylene foam.Ideal for removing the following contaminants from the water:
 • Sand•

 Silt• Rust•
 Pollen
 and other suspended solids
, as well as bacteria larger than 1 μm.

Filtration range: outer layer 25 μm, inner layer 1 μmThe outer layer first traps all particles larger than 25 μm; the inner layer contains an additional filter fleece with a pore size of 1 μm.
The graduated pore size from the outside to the inside ensures maximum filtration performance and extends the filter’s service life.

Replacement interval: approx. 12 months, depending on your water quality

Dimensions and weight:Total height: 620 mm (to top edge of vent valve)
Diameter: 185 mm (housing head with connection nipple)
Empty weight: 5.00 kg + cartridge 1.30 kg If you would like further information, please contact our service office; we would be happy to assist you!