PiTec Under-Cabinet Filter - Primary Filter -

The MAUNAWAI® PiTec Basic Filter is an under-sink water filtration system with no pressure loss, designed for 3/8" flexible hose, 8 L/minYou don’t need a separate—or 3-way—faucet!The PiTec Basic Filter can be easily installed under your kitchen sink.Basic filterIdeal for removing the following contaminants from the water:

• Sand
• Silt
• Rust
• Pollen
• and other suspended solids

Filtration range: 1 μmOur pre-filter is equipped with an antibacterial coating. Upon contact with the protective surface, the bacteria’s reproduction process is interrupted.Usage: The pre-filter should be replaced after 10,000 liters or approximately 12 months. An earlier replacement may be necessary if the water flow is noticeably reduced.Flow rate: 5–8 liters/min, depending on water pressureConnection: 3/8" Connects directly to your cold water line. No additional fittings are required.For installation, you will need:- Additional flexible connection hose 3/8" F x 3/8" M in the required
 length - Teflon tape (thread seal tape)Scope of delivery:1.) Housing with pre-filter
2.) A set consisting of

• 1x wall mount
• 4x stainless steel screws (flat head)
  for attaching the wall mount to the housing
•  4x stainless steel screws (pointed)

3.) 1x housing wrench for opening/closing the housing4.) 2x 3/8" double nipples5.) Installation instructions Dimensions: Filter unit without connections (WxHxD): 123 x 310 x 115 mm.Weight: Completely dry approx. 2.4 kg; completely wet approx. 3.5 kg.Replacement interval: 1–2 years,
depending on your water quality.

Note:Suitable for cold water use only; protect from frost!