Peka 20

PiConnect "Peka 20" Home Water Filtration System with Pre-filter, Intensive Filter, Limescale Protection, and MAUNAWAI Pi Filter Peka 20 is a water filtration system designed for single-family homes, multi-unit residential buildings, or industrial applications.
It can filter both municipal water and well water.
When filtering well water, we recommend conducting a water analysis beforehand to ensure the system is optimally configured.For the best water quality, 2–4 filter modules can be combined according to your specific needs.

Contact our service office—we’d be happy to advise you!All filter components are NSF®-certified.

Water FlowWater flow depends on your water pressure.
The Peka System reduces the incoming water pressure by approx. 0.5–1.0 bar.
Water flow: approx. 45–60 l/min at 4 bar water pressure 1) Primary filterTwo-stage sediment filter made of polypropylene foam.
The MAUNAWAI® basic filter has three times the dirt-holding capacitycompared to conventional filter cartridges of similar size.Ideal for removing the following contaminants from the water:
• Sand•

Silt• Rust•
Pollen
and other suspended solids
, including bacteria larger than 1 μm 

Filtration range: outer 25 μm, inner 1 μmThe filter pore size becomes progressively smaller “from the outside in,” ensuring optimal filtration of sediments.The outer layer first traps all particles larger than 25 μm; the inner layer contains an additional filter fleece with a pore size of 1 μm.Replacement interval: approx. 12 months, depending on your water quality 2) Intensive filterActivated carbon block filter. Despite the filter cartridge’s high fineness,
water pressure drops by only approx. 0.5 bar.Ideal for removing the following contaminants from your water:

• Odors and bad taste in the water
• Chlorine and similar undesirable substances
• Heavy metals, such as lead
• Organic compounds
• Herbicides, pesticides
• Hormone and medication residues,
• microplastics... and much more

Filter fineness: 0.5 μm = 0.0005 mm. This makes it possible to reduce hormone and medication residuesReplacement interval: approx. 12 months, depending on your water quality. 3) Limescale protection filter Chemical-free limescale protection thanks to biotechnologyFilter material: Ceramic granules with a special surface, similar
to that of shells and corals.Advantages•Minerals
remain in the water•The
water remains chemically
unchanged•No salt
tablets•No ion
exchangers•No
electricity•No
wastewater•Reduction of limescale
deposits•No limescale deposits adhering to dry surfaces•Breakdown
of old limescale deposits in pipes and appliances•Formation
of a protective layer in the
pipes•Maintenance-free technology

Chemical-free limescale protectionNo salt tablets, no electricity!The limescale filter cartridge uses ceramic granules with a specially coded surface to initiate the process of heterogeneous catalysis. A similar process can be observed in nature in mussels and corals.
Tap water flows around the granules. Within seconds, small “seed crystals” measuring just a few ten-thousandths of a millimeter form automatically on the granule surface.
These seed crystals, floating in the water, are carried into all pipes and connected appliances. They trap the limescale, preventing it from adhering anywhere in the treated water.The chemical composition of the water remains unchanged.Since the minerals in the water are preserved, the reading on TDS meters may not change.Usage: When used with drinking water free of coarse sediments, the catalyst granules last approximately 3–5 years. Coarse impurities in the water can clog the surface of the granules, necessitating an earlier replacement.In this case, we recommend pre-filtering the water with our basic filter. For optimal quality and maximum service life of the limescale protection filter, the MAUNAWAI® basic filter should also be installed upstream.Replacement interval: approx. 3–5 years, depending on your water quality.
4) MAUNAWAI® Pi FilterThe PI® filter cartridge was developed specifically for the MAUNAWAI® water filter system and delivers exceptionally high water quality.

Benefits:
• Increases pH level•
Releases
oxygen• Antibacterial effect•
Stabilizes the water•
Promotes fine
cluster formation• Releases minerals and trace elements (TDS/ppm value increases)

Filter material: Combination of over 20 different ceramic beadsPI technology was developed in Japan in the 1960s to turn tap water into the best drinking water. The models were the great healing springs and life itself.By applying the five principles in the MAUNAWAI® cartridge—filtration, information, optimization, harmonization, and bioavailability—the water is not only purified of unwanted substances but also restructured, thereby regaining its original cluster form.Modelled after nature, the water flows through various layers of MAUNAWAI PI® filters made of tourmaline ceramic beads, zeolite elements, EM ceramics, and many other ceramics.
Just like a stream flowing from a mountain spring, this process restructures the water and imbues it with new information, which is reflected in the water crystal images of MAUNAWAI® water.At the end of the process, you receive the best and most vibrant water.Usage: The MAUNAWAI® PI filter cartridge should be replaced after approximately 3–5 years.
Dimensions and weight:Total height: 620 mm (to top edge of vent valve)
Diameter: 185 mm (housing head with connection nipple)
Total width: 1175 mm with 4 filters
Empty weight: 20.00 kg; 32.00 kg with 4 cartridges

If you would like further information, please contact our service office; we would be happy to assist you!